Loading tray 3

Loading tray 3

1. Pull the tray out of the printer and remove any media.

HP 3000 3600 3800 as at01 Loading tray 3

2. Raise the output bin extension.

HP 3000 3600 3800 as at02 Loading tray 3

3. Adjust the length guide until the arrow points to the size that you are loading.

HP 3000 3600 3800 as at03 Loading tray 3

4. Move the side width guides until the arrow on the right width guide points to the size that you are loading.

HP 3000 3600 3800 as at04 Loading tray 3

5. Load the media into the tray. If this is special paper, such as letterhead, load it face-up with the top edge toward the front of the tray.
HP 3000 3600 3800 note Loading tray 3 NOTE

If you are duplex printing, see Using 2-sided (duplex) printing for loading instructions.

HP 3000 3600 3800 as at05 Loading tray 3

6. Make sure that the stack of media is flat in the tray at all four corners, and keep it below the height tabs.

HP 3000 3600 3800 as at06 Loading tray 3

7. Slide the tray back into the printer.

HP 3000 3600 3800 as at07 Loading tray 3

HP 3000 3600 3800 Loading tray 3