Loading tray 2

Loading tray 2

HP 3000 3600 3800 caution Loading tray 2 CAUTION

To avoid jams, never open or remove a tray during printing.

1. Pull tray 2 out of the printer and remove any media.

HP 3000 3600 3800 as st01 Loading tray 2

2. Slide the output bin extension out from the bin.

HP 3000 3600 3800 as st02 Loading tray 2

3. Adjust the length guide until the arrow points to the size that you are loading.

HP 3000 3600 3800 as st04 Loading tray 2

4. Move the side width guides until the arrow on the right width guide points to the size that you are loading.

HP 3000 3600 3800 as st03 Loading tray 2

5. Load the media into the tray. If this is special paper such as letterhead, load it face-up with the top edge toward the front of the tray.
HP 3000 3600 3800 note Loading tray 2 NOTE

If you are duplex printing, see Using 2-sided (duplex) printing for loading instructions.

HP 3000 3600 3800 as st05 Loading tray 2

6. Make sure that the stack of media is flat and that the media is below the height tabs.

HP 3000 3600 3800 as st06 Loading tray 2

7. Slide the tray back into the printer.

HP 3000 3600 3800 as st07 Loading tray 2

HP 3000 3600 3800 Loading tray 2