Network configuration

You might need to configure certain network parameters on the printer. You can configure these parameters from the printer control panel, the embedded Web server, or for most networks, from the HP Web Jetadmin software.

	NOTE	For more information about using the embedded Web server, see Using the embedded Web server.

For a complete list of supported networks and for instructions on configuring network parameters from software, see the HP Jetdirect Embedded Print Server Administrator’s Guide. The guide comes with printers in which an HP Jetdirect embedded print server is installed.

This section provides information about the following topics:

• Manually configuring TCP/IP parameters from the printer control panel
• Disabling network protocols (optional)
• Enhanced I/O (EIO) configuration