Tray Behavior menu options
The TRAY BEHAVIOR menu provides the following user-defined options:
| ●
| USE REQUESTED TRAY: Select EXCLUSIVELY (the default value) to ensure that the printer will not automatically select another tray when you indicate that a specific tray should be used. Select FIRST to allow the printer to pull from a second tray if the specified tray is empty or contains a different media type or size.
|
| ●
| MANUALLY FEED PROMPT: If you select ALWAYS (the default value), the system always generates a prompt before pulling from the multipurpose tray. If you select UNLESS LOADED, the system generates the prompt only if the multipurpose tray is empty or if it is configured for a different type or size.
|
| ●
| PS DEFER MEDIA: If you select ENABLED (the default value), the printer uses HP’s paper-selection process. Select DISABLED to allow the printer to use the Adobe paper-selection process.
|
| ●
| USE ANOTHER TRAY. If you select ENABLED (the default value), the printer prompts users to use another tray when the selected tray is unavailable. If you select DISABLED, the printer does not prompt the user.
|
| ●
| SIZE/TYPE PROMPT. If you select DISPLAY (the default value), the printer prompts users to confirm the media size or type loaded in the tray immediately after the tray has been loaded. If you select DO NOT DISPLAY, the printer does not prompt the user.
|
| ●
| DUPLEX BLANK PAGES. If you select AUTO (the default value), the printer might not flip pages in the duplexer for blank pages, which enhances printer performance. If you select YES, the printer duplexer flips each page.
|
This section provides information about the following topics:
HP 3000 3600 3800 Tray Behavior menu options